HIGH SPEED EXTRUSION 与一个较小的足迹
Building on the proven foundation of the Essentium High Speed Extrusion (HSE) 3D Printing technology, the HSE 240 HT Dual Extruder 3D Printing Platform speeds time to production of complex parts, while significantly reducing post-processing costs. Featuring a new industrial design including a single dual extrusion print head, the latest addition to the Essentium HSE 3D Printer portfolio is designed to maximize the performance, reliability, and efficiency of parts production — all within a small footprint.
Smallest Footprint
Harness the power of High Speed Extrusion even where space is limited.
LOWEST PRICE POINT
The power of larger High Speed Extrusion 3D printers, at a lower entry price point increases ROI.
AUTO SPOOL SWITCHING
Run longer print jobs to maximize print time and save on material costs.
Printer Specifications
- Technology: High Speed Extrusion
- Print Heads: One dual extrusion print head
- Build Volume: 430 x 350 x 375 mm
- Part Accuracy: ±.150 mm or .1% (whichever is larger)
- Print Speed: 400 mm/s
- Throughput: 125 g/hr
- Nozzle: Hozzle™ heated nozzle
- Nozzle Diameters: 0.4, 0.8 mm
- Build Plate Placement: Magnetic and Vacuum
- Build Plate Temperature: Up to 190°C
- 构建室温度: Up to 185°C
- Printer Dimensions:: 1170 x 830 x 1715 mm
- Net Weight: 450 kg
- Electrical Requirements: 200-240 VAC Single Phase, 50-60 Hz 16 A circuit
- Additional Features: Non-slip, high-torque extrusion system, X-Y stage linear servo motors, auto spool switching, open material platform
Frequently Asked Questions
- Single Extruder Mode prints single parts
- Support Mode prints support for parts in progress
- Multi-Process Mode prints two materials or two Hozzle heated nozzle sizes
Both water-soluble and break-away support materials can be used to print.
The Essentium HSE 240 HT 3D Printer build volume is 430 mm x 350 mm x 375 mm.
Essentium 3D Printing Bed Adhesives are compatible.
Service options available include Remote Trouble Shooting, Preventative Maintenance, and Onsite Repair.
Automotive, Electronic Manufacturing, Contract Manufacturing, and Defense and Aerospace industries.
Yes.
The HSE 240 HT 3D Printer has a build chamber capable of up to 185°C and can process many high-temperature materials.
Yes.
Guided Online Training, Installation Services, and Face-to-Face Training are available.
Yes.
The filament run-out sensor will automatically detect when a change is needed to the next spool and will initiate the change assuming there is an additional spool loaded.
Yes.
Two filament drawers are designated for each extruder. Auto spool switching will occur between these two spools.
Yes.
Printing will be paused.
